The AsMODus Atomizer is BEASTLY!

Discussion in 'GrimmGreen Videos' started by GrimmGreen, Aug 18, 2014.

  1. GrimmGreen

    GrimmGreen New Member Member

    Oct 12, 2012

    The AsModUs atomizer I received this product at no charge from the vendor for the purpose of doing a video, Therefore it has no monetary value to me. This video is my opinions and experiences with the product, and is in no way intended to be the final hammer of judgment. now then. I do relize my build is not the perfect example of a parallel coil build, but it kind of gives you an idea of how it works. This ohm'd out to 0.15ohms which is low! Even with a 30amp battery that is still on the upper upper end of the safety zone. Shortly after this video I rebuilt it using 24g kanthal ( non parallel) and it came out to 0.32 ohms, which is much more reasonable for this battery. If you have a 26650 size device, and you want a wicked high quality 26650 sized atomizer that is easy to build on and has nice airflow. then the AsModUs atomizer might be exactly what you're looking for. The middle sleeve secion secures to the base via a tiny tiny screw. Which makes the whole atomizer feel much more secure. The top pops offfor super easy dripping and the whole things feels very nice It's a helios 4 post hole design. The holes in the posts are VERY large. So something like a 29g kanthal dual coil would probably not work the best. Twisted 28g, or a nice parallel coils seem to work much better with those LARGE post holes. The airflow is nice, but the flavor is slightly less intense than i'm used to with other smaller RDAs. Just due to that LARGE chamber on the inside. Vape budget hands time, the AsModUs atomizer clocks in at $120. That's a lot of scrilla for an atomizer. but you're also getting a LOT of atomizer with the Asmodus. In the end the decision is yours to make, feel free to check it out below

    Via: Grimm Green's Youtube Channel

Share This Page