Discussion in 'GrimmGreen Videos' started by GrimmGreen, Aug 4, 2013.

  1. GrimmGreen

    GrimmGreen New Member Member

    Oct 12, 2012

    I received this product at no charge from the vendor for the purpose of doing a video, Therefore it has no value to me. This video is my opinions and experiences with the product, and is in no way intended to be the final hammer of judgment. Just because I like to mix things up every once and a while. The uppie - Closie - Rebuildy segment is at the end of the video for those interested in watching me rebuild it. Now then.... The Nimbus V3 is quite the nice rebuildable atomizer IMO. You can set up dual coils, single coils, triple coils and probably quad coils if you have the skills and patience, which I do not. Like I said in the video, The Nimbus comes stock with two 1.0mm airflow holes in the top cap. This RBA ( rebuildable atomizer ) would GREATY benefit from bigger airflow holes. Most people including myself don't have access to a drill press so lets you choose what size you want your airflow holes to be. I would suggest going a bit bigger than stock. Some 1.5mm or 2.0mm airflow holes would probably be perfect on this one. The Nimbus has a nice big deck for coil building. It uses Philips heads screws for securing the wire like the Igo-l which is nice, and it has a big ol juice cup or "reservoir" to hold the extra juice that were all bound to drip in there. It's a great RBA in my opinion. Pricey ( vape budget hands ) but great. Easy to work with and easy to use. For those interested check it out at Thanks so much for watching everone!! and remember, safety first. Please don't build a coil that your battery can't handle.

    Via: Grimm Green's Youtube Channel

Share This Page